Flashing Samsung Galaxy S3 ROM / Kernel Using ODIN


  • Download ODIN
  • Download Custom / Stock ROM
  • Download Custom / Stock Kernel
  • Installed Samsung Driver / KIES

Flashing Galaxy S3 ROM / Kernel

  1. Go to menu > Settings > Application > Development
  2. Check on Usb Debugging.
  3. Turn off the device
  4. Open Odin
  5. Make sure that repartition is uncheck
  6. Inside ROM / Kernel, ussually you`ll find 3 tar files. put every file in their field
    • PDA : Modem
    • Phone : Code
    • CSC : CSC
  7. Press and hole Home + Power + Volume [-] Buttons, then press Volume[+] until it`s boot in download mode
  8. Connect Samsung Galaxy S3 to PC/Laptop
  9. look at your ODIN, when ID:COM become green than your device is ready to flash
  10. Click Start
  11. Wait until the process is done and galaxy s3 reboot
  12. Remove your device from PC/Laptop
  13. Done

flashing samsung galaxy s3 using odin


  • This step are work for official ROM / Kernel
  • In some case, PC may not detect the device. try to reconnect. If galaxy s3 still undetected then try to remove all device that connect trough USB Port (ex: printer, external drive)
  • Make sure KIES is inactive before connect the device

Do With Your Own Risk

Download Support File

Related Post