Install ClockWorkMod in ZTE Light Plus

Before install ClockWorkMod in ZTE Light Plus, if the device using Gingerbread 2.3.4 you need downgrade to 2.3.3 before install ClockWorkMod with the steps below.


  • Download and extract zteV9PlusToolbox
  • Internet Connection

Install ClockWorkMod in ZTE Light Plus

  1. Go to menu > settings > application > development
  2. Check USB Debugging (enable)
  3. Go to menu > settings > application
  4. Check Unknow Sources
  5. Connect ZTE Light Plus to PC/laptop
  6. Let the windows find the driver.
  7. After the process above, go to start > devices and printer
  8. Do right click on ZTE HSUSB Device > Eject > CD Drive usb driver
  9. Once again windows will find another driver. wait until it`s done
  10. Go to device manager, you`ll see ZTE Composite ADB Interface
  11. Go to zteV9PlusToolbox extract folder
  12. Run runme.bat
  13. Choose no 3, install ClockWorkMod and follow the instructions
  14. Reboot the device


  • To boot in recovery mode in ZTE Light Plus just press and hold power + volume[-] buttons.
  • If at step 10 you cannot find ZTE Composite ADB Interface, repeat from step 4

Do with your own risk

Download Support File

Related Post